BOD FSP5 Switch for 2015–2019 Ford 6.7L Powerstroke

2015-2019 Ford FSP5

Key Features:

• Not Having To Pull Over To Flash A Different Tune, Switching Instantly Between Calibrations.
• Stock, Economy, Tow, Heavy Haul, Performance At The Tip Of Your Fingers.
• Valet Mode If You Have An Employee Or Teenager So They Can't Adjust Your Tune Settings.
• Includes All Items Required For Install.
• Will Work On PowerStroke Diesel Engines 2015-2019 6.7L.

Description:

• What Is FSP5?
• FSP5 Stands For "Ford Switch Performance". FSP5 Gives You The Ability To Switch Between 5 Calibrations With The Purchase Of SOTF (Shift On The Fly).
• This Switch Only Works With A Custom Engine Calibration.
• Calibrations Not Included.

Includes

•  Selector Switch
•  Aluminum Knob
•  1-5 Decal
• Allen Key
• Connector

Install

Install Instructions:

**CLICK HERE FOR INSTALLATION**

• Step 1: Route The Wires Through The Firewall.
• Step 2: Locate The Fuel PSI Sensor Near The Factory Upper Fuel Filter Housing And Unplug It.
• Step 3: Install The Pins Into The Appropriate Holes On The Connector In This Kit And Then Connect To The Factory Harness.
• Step 4: Zip-Tie Everything Up Neatly Under The Hood, Making Sure You Do Not Zip-Tie To Anything Hot.
• Step 5: Install The Switch In The Desired Location Inside The Cab.
• Step 6: Done

• ATTENTION! Your FSP5 Switch Has One Nut & One Locking Washer. You Will Remove Both The Nut And Locking Washer When Placing It From Behind The Dash. Do Not Use Unnecessary Force When Tightening Them Back On The Switch, Be Gentle.